Not used RCC unit:
5. This step is applicable only if the repeater has an RCC unit which is
not used (or has been removed).
If the P130 cable connector has been removed, then pin 1 and 2 of the
P130 port must be interconnected with a jumper. Do not interconnect
any other position than between pin 1 and 2 of the P130 port.
The jumper is found in the P113 parking device if not used in the
P130 port.
The P130 port is described on
and the P113 parking device
is described on
6. Set up a PC with OMT32 to the repeater by connecting a standard
RS-232 serial cable between a COM port on the PC and the P112 PC
port located to the right in the repeater cabinet (see
page 3-9).
Port P112 is described on
Now, you can commission the repeater as described in
ANT
HI
LO
ANT
LO
HI
P112
ALLGON Systems AB
ALR Compact Repeater
Installation
VD203 67/EN - User’s Manual
Rev. 1A 2000-07
3 - 8
