Alarm
Alarm signals from external sensors are received via the P119 alarm port.
The software on the BSC board is able to activate acoustic or visual alarm
or direct the alarm to the P130 PCC port to be forwarded, via the RCC
unit (or modem and telephone line) to OMT32 (or OMS) located in an
operation and maintenance central.
Alarms can be configured from OMT32 (or from OMS).
Repeater Setup
The repeater parameters can be set locally by means of a desktop or
notebook loaded with the OMT32 software (or the OMS software). The
PC or notebook is connected to the repeater via the P112 PC port.
The repeater parameters can also be set remotely by means of an RCC
Remote Communication Control unit (or via a telephone line and a
modem) connected to the repeater via the P130 PCC port.
ALLGON Systems AB
ALR Compact Repeater
Functional Description
VD203 67/EN - User’s Manual
Rev. 1A 2000-07
5 - 7
