Allflex AWR300 User Guide
13/11/19
Page 35
6.5.3.1
Set RS232 Baud Rate
Screen
Details
To allow devices to communicate via RS232, the connection
speed (
baud rate ) must be the same on both devices.
The default value of ‘9600’ is common, but quite slow.
Values of up to ‘115200’ are possible.
/ … Change the baud rate
… Set the new value
6.5.3.2
Setup Scale
The AWR300 is able to receive the weight from indicators that can send it via Bluetooth. There
are different scale types supported, including some major brands on the market. This function
can only be used for
Task-Mode
, where the ‘
Weight-from-Scale
’ field is available.
Screen
Details
The scale type, the interface and the scale baud rate must
be configured correctly to allow this feature to work.
Choose the correct type depending on the model you have.
/ / / … Select the scale type
… Apply the setting
The AWR300 always includes a Bluetooth module and if the scale has Bluetooth built in as
well, so using an RS232 cable connection is not necessary. Scales without integrated Bluetooth
can be upgraded using an external adapter. Contact your local distributor for further details.
However, RS232 is also supported by the AWR300 but in this case you will need the optional
RS232 cable ‘APC310’ (p/n 4061). An adapter might be necessary additionally, depending on
your weighing indicator.
Screen
Details
Select the interface using the / / / keys and confirm
with .
