Allflex AWR300 User Guide
13/11/19
Page 28
Screen
Details
Select the correct baud rate using the / keys and
confirm with .
Baud rates from 300bps to 115200bps are possible in
particular steps.
6.4.5.4
Search BT Printer
Before you can start printing via Bluetooth, the AWR300 must be paired with a printer. The
reader scans for available Bluetooth devices first. The scan starts when this menu item is
selected.
Screen
Details
Depending on how many devices are present, the scan can
take a while, but at least 10 seconds
.
If Bluetooth is switched off, the AWR300 shows the
corresponding error message. In this case, activate
Bluetooth first (see chapter 6.6.3.3).
After the scan has completed, the available devices are
listed. Note that not only printers are listed here, but other
Bluetooth devices also. Ideally, you should know the name
of your Bluetooth printer. Sometimes it might be useful to
see the BD-address of the found devices instead of the
names. You may switch between both views by using the
key.
