Alleswolke UCM3300 series, User Manual

Page: 33 / 38

● Patrol mode
If the vehicle is left unattended in an area with elevated security concerns, before leaving the
vehicle, long press the emergency button for 5 seconds. The system will switch to patrol mode,
with the camera on rotating in 360-degree and recording. To cancel the patrol mode, long press
the button again for 5 seconds.
The feature will keep the camera recording and will consume more power than the
regular sleep mode. It is not recommended to use this feature for a prolonged period in order
to preserve the vehicle battery life, especially for vehicles using old batteries that have not
been maintained for a long period.
When the system detects a low voltage from the battery, the device will stop Patrol
mode and switch to sleep mode.
● Emergency Button
1. All Emergency Remote buttons have been paired before purchase. In Application Settings
menu, it also supports a manual pair-up operation for any further requirements.
1
）
System working in Normal mode with smartphone application connected to device via
Wi-Fi or LTE
2
）
Emergency Button should be less than 5 feet from camera
3
）
In Application Setting menu, tap “Emergency Button Pairing”
4
）
Long press button for 8 seconds, camera will have voice notice to indicate pairing success
If still unable to pair, please check Emergency button’s battery, which uses a CR2032 battery.
2. Short press and Long press
When the system is in active mode,
Short press
the emergency button (for approximately 1 second, the camera will play a shutter
sound), an emergency alert will be triggered. Please see page 33 for detail information.
Long press
the emergency button (for approximately 5 second, the camera will say “enable
patrol mode” and switch to patrol mode. Please see page 33 for detailed information. To cancel
the patrol mode, long press the button again for 5 seconds.
33