Alleswolke UCM3300 series, User Manual

Page: 18 / 38

1. Vehicle Select List and Status Display
If you have multiple devices (hubs and cameras) installed in di ff erent vehicles, you can
switch the hub here. Each hub represent a vehicle. It also shows each vehicle’s status.
Sleeping Mode: The vehicle’s engine is o ff , the camera will be facing to the inner of the
vehicle. the system is in power saving mode and can be waken up at any time by taping
“Live Video” or “Live Photo”. The wake-up process may take up to 1 minutes.
For model UCM3310 with WP7504 module, the o ffl ine mode may also display as Sleep
Mode.
Active Mode:
The vehicle’s engine is on, system is full power operational, you can connect
the system for video streaming or live photo by taping “Live Video” or “Live Photo”
Patrol Mode:
The vehicle’s engine is o ff , but user can manually lock the system in patrol
mode, in this mode, the system is always on and camera is rotating 360 to patrol and
surveillance the surroundingsYou can connect the system for video streaming or live photo
by taping “Live Video” or “Live Photo”
O ffl ine Mode
: cannot wake up for remote access
O ffl ine mode is not applicable for model UCM3310 with WP7504 module.
2. Setting Menu
Basic Settings for Hub and Cameras, see page 30 for more information,
3. Camera name
Shows camera’s name, you may make a change in Settings -> Camera Settings.
4. Live Video Streaming
Tap for video live streaming if the camera is in activate mode.
Tap for camera waking-up and video live streaming if the camera is in sleep mode, this may take
up to 1 minute to finish the wake-up process and start live video streaming.
All Remote Video Clips will be stored into Cloud server and can be retrieved in Event History.
Please see page 20&21 for detailed live video page introduction.
18