allen SSE12 Operations & Parts Manual Download Page 9

Page: 9 / 76

050362

Page 9

Ordering Parts

Section 4.0 contains illustrated parts lists for help in ordering replacement parts for your machine. Follow the instructions
below when ordering parts to insure prompt and accurate delivery:

1. All orders for service parts - include the serial number for the machine. Shipment will be delayed if this information

is not available.

2. Include correct description and part number from the “PARTS” section of this manual.

3. Specify exact shipping instructions, including the preferred routing and complete destination address.

DO NOT

return parts to AEC without receiving written authorization from AEC. All authorized returns must be shipped

pre-paid.

5. When placing an order, please contact the AEC dealer nearest you.

ALL INFORMATION, SPECIFICATIONS, AND ILLUSTRATIONS IN THIS MANUAL ARE

SUBJECT TO CHANGE WITHOUT NOTICE AND ARE BASED ON THE LATEST

INFORMATION AT THE TIME OF PUBLICATION.

Summary of Contents for SSE12













































































Search results

Summary of Contents for SSE12

Reviews:

allen SSE12, Operations & Parts Manual, Page: 9 / 76

Search results

Summary of Contents for SSE12

Reviews: