manualshive.com logo in svg

allen SSE12, Operations & Parts Manual, Page: 45 / 76

Share
Download
allen SSE12 Operations & Parts Manual Download Page 45

SECTION 4

PARTS

050362

Page 45

We recommend AEC quality replacement parts, available from the AEC Customer Service Department or your nearest AEC 
Dealer.

Part numbers are subject to change without notice. Part numbers might be different outside of the United States of America. 
Use part numbers listed in the applicable parts list table  when you place your order. If a part number changes,  the AEC 
Customer Service Department or your nearest AEC dealer will have the latest part number for the replacement part.

Remember when you order replacement parts, you will need your model number and serial number. These are the num-
bers that you have recorded in the UNIT ID section of this manual. Please order replacement parts by the appropriate part 
number, not the key number.

This manual contains an illustrated parts list for help in ordering replacement parts for your machine. Follow the instructions 
below when ordering parts to insure prompt and accurate delivery:

1.  All orders for service parts - include the serial number for the machine. Shipment will be 

delayed if this information is not available.

2.  Include correct description and part number from the “PARTS” Section 4.

3.  Specify exact shipping instructions, including the preferred routing and complete destina-

tion address.

4.  DO NOT return parts to AEC without receiving written authorization from AEC. All autho-

rized returns must be shipped pre-paid.

5.  When placing an order, please contact the AEC Dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

 
                                                                                                                                                                                                                                       

Replacement Part Procedure

Summary of Contents for SSE12













































































Reviews:

No comments