allen MP245 Operations & Parts Manual Download Page 9

Page: 9 / 106

067975

Page 9

Ordering Parts

Section 4 contains illustrated parts lists for help in ordering replacement parts for your machine. Follow the instructions
below when ordering parts to insure prompt and accurate delivery:

All orders for service parts - include the serial number for the machine. Shipment

will be delayed if this information is not available.

Include correct description and part number from the “PARTS” section of this

manual.

Specify exact shipping instructions, including the preferred routing and complete

destination address.

DO NOT return parts to AEC without receiving written authorization from AEC. All

authorized returns must be shipped pre-paid.

When placing an order, please contact the AEC dealer nearest you.

All information, specifications, and illustrations in this manual

are subject to change without notice and are based

on the latest information at the time of publication.

VISIT US!!!

www.alleneng.com

LIKE US!!!

www.facebook.com/AllenEngineering

@alleneng

WATCH US!!!

www.youtube.com/AllenMachinery

Summary of Contents for MP245











































































































Search results

Summary of Contents for MP245

Reviews:

Related manuals for MP245

Brands by name

Popular brands

allen MP245, Operations & Parts Manual

Search results

Summary of Contents for MP245

Reviews:

Related manuals for MP245

Brands by name

Popular brands