allen MP245, Operations & Parts Manual

Page: 33 / 106

SECTION 1
SAFETY
067975
Page 33
● Make sure the hitch and coupling of the towing vehicle are rated equal to, or greater than the trailer “gross vehicle weight
rating.”
● ALWAYS inspect the hitch and coupling for wear. Never tow a trailer with defective hitches, couplings, chains, etc.
● Check the tire air pressure on both towing vehicle and trailer. Trailer tires should be inflated to 50 psi cold. Also check the
tire tread wear on both vehicles.
● ALWAYS make sure the trailer is equipped with a safety chain.
● ALWAYS properly attach trailer’s safety chains to towing vehicle.
●
ALWAYS
make sure the vehicle and trailer directional, backup, brake and trailer lights are connected and working prop -
erly.
● DOT Requirements include the following:
• Connect and test electric brake operation.
• Secure portable power cables in cable tray with tie wraps.
● The maximum speed for highway towing is 55 MPH unless posted otherwise. Recommended off-road towing is not to
exceed 15 MPH or less depending on type of terrain.
● Avoid sudden stops and starts. This can cause skidding, or jack-knifing. Smooth, gradual starts and stops will improve
towing.
● Avoid sharp turns to prevent rolling.
● Trailer should be adjusted to a level position at all times when towing.
● Raise and lock trailer wheel stand in up position when towing.
● Place chock blocks underneath wheel to prevent rolling while parked.
● Place support blocks underneath the trailer’s bumper to prevent tipping while parked.
● Use the trailer’s swivel jack to adjust the trailer height to a level position while parked.
Transportation Safety (cont’d)