background image

INSTRUCTIONAL

OWNER’S MANUAL

9

STEP 5:

ATTACHING THE FOUR SEASON COVER

1. Position the four-season cover over the trailer where roll-up window is facing towards the front side
  of the trailer. (Fig.12).
2. Wrap the Velcro backed fixing straps and secure the cover around the frame.
3. Secure the Velcro material at the bottom front of the cover to the matching Velcro material on the
  lower front fabric panel.

FIGURE 12.

FIGURE 14.

FIGURE 13.

NOTE:

The four-season cover is designed to keep passengers and cargo dry and warm in inclement weather.
It also protects the passengers from flying debris. The four-season cover can be rolled up to allow for
added ventiltion in hot weather. Velcro closures keep the four-season cover in place when rolled up.

WARNING!:

 

Never use the trailer without the four season cover. The front window or bug screen must  

   

 

 

be attached to protect children from flying objects.

STEP 6:

INSTALL THE SAFETY FLAG

1. Find and assemble the 3-piece safety flag.
2. Locate flag pocket in trailer cabin fabric, and insert flag in pocket a as shown (Fig14).
3. Remove flag before attempting to fold Trailer

FOUR SEASON COVER & FLAG

Summary of Contents for T2 BIKE TRAILER













Reviews: