Lowes.com/allenandroth
8
9. Cut off excess fixture wires approximately 6 to 9
inches above top of the downrod assembly (B).
Strip insulation off 1/2 in. from the end of each
fixture wires.
9
8. Install 25-watt bulbs (H) into each socket on the
motor housing (F).
8
7
F
F
BB
H
B
G
7. Carefully place the upper glass (G) on the motor
housing (F). Ensure the upper glass (G) sits evenly
on the motor housing (F), then align the holes on
support bracket (BB) with the holes on motor housing
(F). Secure support bracket (BB) against the upper
glass (G) and motor housing by tightening the screws
packed with the support bracket (BB).
CAUTION:
Alternate tightening support bracket
(BB) every few turns, and do not overtighten the
screws to avoid cracking the glass.
INITIAL INSTALLATION INSTRUCTIONS
6 to 9 in.
CAUTION:
Ensure all set screws are tight
before moving on to the next step.
Hardware Used
Support Bracket
x 3
BB
