Lowes.com/allenandroth
WIRING INSTRUCTIONS
4. Wrap electrical tape (not included) around each
wire connector and make sure no bare wire or wire
strands are visible after making connections.
Then, turn wires upward and carefully push them
into the outlet box; make sure the white and
green connections are on one side and the black
connections are on the other side.
4
White
Black
Blue
Orange
Green (Ground Wire)
Listed Outlet Box
1. Loosen but do not remove the two preassembled
screws on the bottom of mounting bracket (A). Raise
canopy (C) up and align the keyholes on the bottom
with the 2 loosened screws on mounting bracket
(A). Rotate canopy (C) until both screws drop into
recesses of keyslots, then slide canopy cover (D)
over screws. Rotate canopy cover (D) clockwise until
tight.
Note:
You may need to adjust the screws on
mounting bracket (A) until the canopy (C) and canopy
cover (D) have a snug fit.
1
FINAL INSTALLATION INSTRUCTIONS
C
A
D
Screw
Screw
2. Insert blade (I) into slot on the flywheel (P) of the
motor housing (F). Align the holes on the blade (I)
with the holes on the blade holder (R), then attach the
blade (I) with blade screws (AA).
Repeat for the remaining blades (I).
2
Hardware Used
Blade Screw
x 15
AA
F
P
R
I
AA
11
