Lowes.com/allenandroth
7
4. Remove hairpin clip (O) and clevis pin (N) from the
coupling in motor housing (F). Retain for later use.
Loosen the two screws in the coupling, but do not
remove them.
Note:
Make sure to keep loose hardware separate to
avoid confusion during installation.
5. Place downrod assembly (B) through canopy (C),
canopy cover (D) and coupling cover (E).
6. Feed power wires from motor housing (F) through
downrod assembly (B), then insert downrod assembly
(B) into the coupling on motor housing (F).
Align the hole on downrod assembly (B) to hole on
coupling, then re-install clevis pin (N). Re-attach
hairpin clip (O) into clevis pin (N) until it snaps into
place, then tighten the two previously loosened
screws.
4
5
6
INITIAL INSTALLATION INSTRUCTIONS
Screw
Coupling
C
D
E
B
B
N
F
O
N
N
O
O
F
Screw
