Lowes.com/allenandroth
FINAL INSTALLATION INSTRUCTIONS
3. Remove one of the screws preassembled on
mounting plate (Q) and loosen but do not remove the
other two. Insert the wires from the motor housing
(F) through the middle hole in the switch housing
(J). Attach the switch housing (J) to the mounting
plate (Q) by placing the keyslot holes of the switch
housing (J) onto the two protruding screw heads on
the mounting plate (Q). Twist the switch housing (J)
until the screws engage the keyslots, then install the
previously removed screw into the closed hole in
the switch housing (J). Tighten all screws to secure
switch housing (J) to mounting plate (Q).
3
F
Q
J
Screw
Screw
4. Connect the 2 single-pin connectors from the motor
housing (F) to the 2 single-pin connectors from the
light kit (K) — WHITE to WHITE and BLACK to
BLACK. Remove one of the screws from the switch
housing (J) and loosen but do not remove the other
two. Attach the light kit (K) to the switch housing (J)
by placing the keyslot holes from the light kit (K) onto
the two protruding screws on the switch housing (J).
Twist the light kit (K) until the screws engage the
keyslots, then install the previously removed screw
into the closed hole in the light kit (K). Tighten all
screws to secure light kit (K) to switch housing (J).
4
K
F
12
J
5. Install 40-watt bulbs (L) into each socket on the light
kit (K).
5
CAUTION:
An energy-saving wattage limiter is
included in the receiver from the power kit (T). When
replacing bulbs, ensure bulb wattage is below 190
watts, otherwise the item will either dim the lights to
190 watts or will automatically turn off.
L
K
