OPERATIONS
SECTION 1
S1-5
• OPERATING SAFETY •
Familiarity and proper training are required for the safe operation of this equipment. Equipment
operated improperly or by untrained personnel can damage equipment and could be dangerous.
Read the operating instructions contained in both this manual to familiarize yourself with the location
and proper use of all the controls.
DO NOT
operate this machine until you have read the operating and safety instructions. Operate
the machine in accordance with the manufacturer’s instructions.
ALWAYS
inspect your screed upon arrival for damage or tampering that can sometimes occur
during shipping. If damage is found, file a claim with your carrier immediately!! Mark
freight bill of lading as “damaged shipment”.
NEVER
allow untrained personnel to operate your air powered screed. Individuals who operate this
screed should have adequate training in operating procedures.
DO NOT
attempt to fill hydraulic(winch) tanks while machine is running.
NEVER
use over-the-counter hardware to replace manufacturers hardware. Contact your nearest
Allen Engineering dealer or our Customer Service department.
HAZARD:
When operating machines with gas engines in confined areas, the fumes must be
ventilated. Improper ventilation could lead to serious health problems or even death.
ALWAYS
be aware of
HOT
components on this machine, such as, hydraulic components.
