OPERATIONS
SECTION 1
S1-14
• ATTACHING WINCHES TO FORM STAKES •
The figure below illustrates the proper way to attach the winch cables to the form stakes. This is the
only way that the cables should be attached. If the cables are not attached properly, the cables
could snap loose causing severe injury to finishing personnel surrounding the screed.
FIRST STAKE
FROM END
SECOND STAKE
FROM END
WINCH CABLE
CABLE HOOK
• DETERMINING LEFT AND RIGHT OF
The following illustration shows all the key information on how to determine the left and right
and the front and rear of a screed section.
Note the circle with the serial
number.
This is probably the easiest way to
determine the left and right sides of
the screed assembly. The right side
has the model number and the a 5-
digit serial number. The left hand
side is only stamped with an “L”.
Also the front of the screed is
determined by the two screed blades
mounted back-to-back. The rear of
