LIMITED WARRANTY
Allen Engineering Corporation warrants its products to be free of defects in material or workmanship for the
following periods:
A. All New Machines and Part
6 Months
B. All New Gear Boxes
2 Years
C. All Factory Reconditioned Gear Boxes
1 Year
Warranty period begins on first day of use by End User. This first day of use is established by a completed
warranty card or a Bill of Sale to the end user. All warranty is based on the following limited warranty terms and
conditions.
1.
Allen Engineering Corporation’s obligation and liability under this warranty is limited to repairing or replacing parts
if, after Allen’s inspection, it is determined to be a defect in material or workmanship. Allen Engineering Corporation
reserves the choice to repair or replace.
2.
If Allen Engineering Corporation chooses to replace the part, it will be at no cost to the customer and will be made
available to the Distributor/Dealer from whom the customer purchased the product.
3.
Replacement or repair parts, installed in the product, are warranted only for the remainder of warranty period of the
product as though they were the original parts.
4.
Allen Engineering Corporation’s warranty applies only to the products that are manufactured by Allen Engineering
and does not cover component parts such as engines and clutches. Allen Engineering Corporation
DOES NOT
warranty clutches. Engine warranty claims should be made directly to an authorized factory service center for the
particular engine make.
5.
Allen Engineering Corporation’s warranty does not cover the normal maintenance of products or its components
(such as engine tune-ups and oil changes). The warranty also does not cover normal wear and tear items (such as
belts and consumables).
6.
Allen Engineering Corporation’s warranty will be void if it is determined that the defect resulted from operator
abuse, failure to perform normal maintenance on the product, modification to product, alterations or repairs made
to the product without the written approval of Allen Engineering Corporation. Allen Engineering Corporation also
excludes from warranty any failure of clutches on any engine driven piece of equipment.
7.
If a new gear box has a factory defect within the first year of use, Allen Engineering Corporation will either repair
the gear box or replace it with a new gear box. If a new gear box has a factory defect in the second year of use,
Allen Engineering Corporation will either repair it or replace it with a factory reconditioned gear box. Impact
damage is
NOT
covered under the gear box warranty.
8.
Allen engineering Corporation will pay shop labor repair on warranty at the Allen Engineering Shop Labor Rate in
existence on the date of the warranty claim. An Allen Engineering Labor Chart will determine the time allowed to
complete a repair and will govern the shop labor hours that will be allowed.
9.
Allen Engineering Corporation will pay freight on warranty replacement parts at Worldwide standard ground rates.
No warranty replacement parts will be shipped air freight at the expense of Allen Engineering Corporation. Allen
Engineering only pays outbound freight charges when sending warranty replacement parts to the customer VIA
ground service. Allen Engineering does not pay any inbound freight, however, if Allen Engineering determines this
to be warranty defect only then will Allen Engineering reimburse the customer for inbound freight at standard
ground rates.
10. Allen Engineering Corporation’s warranty policy
WILL NOT COVER
the following; taxes, shop supplies,
environmental surcharges, air freight, travel time, loss of rental revenue, or any other charges whatsoever or any
liabilities for direct, incidental, or consequential damage or delay.
11. Allen Engineering Corporation makes no other warranty, expressed or implied. This limited warranty is in
lieu of the warranty of merchantability and fitness. There are no other warranties that extend beyond the
description on this document.
12. No Allen Engineering Corporation employee or representative is authorized to change this warranty in any way or
grant any other warranty unless such change is made in writing and signed by an officer of Allen Engineering
