Rockwell Automation Publication 1734-IN043B-EN-E - January 2019
9
POINT I/O 4 Channel IO-Link Master Module
Install the Mounting Base
To install the mounting base on the DIN rail, proceed as follows:
1.
Position the mounting base vertically above the installed units (adapter,
power supply, or existing module).
2.
Slide the mounting base down allowing the interlocking side pieces to
engage the adjacent module or adapter.
3.
Press firmly to seat the mounting base on the DIN rail. The mounting
base snaps into place. Be sure that the orange DIN rail locking screw is in
the horizontal position and that it has engaged the DIN rail.
Install the Module
The module can be installed before or after base installation. Make sure that the
mounting base is correctly keyed before installing the module into the mounting
Slide the mounting base until the
interlocking side pieces engage the
adjacent module or adapter.
46014