Rockwell Automation Publication 1734-IN043B-EN-E - January 2019
11
POINT I/O 4 Channel IO-Link Master Module
4.
Press to secure. The module locks into place.
Install the Removable Terminal Block
A Removable Terminal Block (RTB) is supplied with your wiring base assembly.
To remove, pull up on the RTB handle. This allows the mounting base to be
removed and replaced as necessary without removing any of the wirings. To
reinsert the Removable Terminal Block, proceed as follows.
1.
Insert the end opposite the handle into the base unit.
This end has a curved section that engages with the wiring base.
2.
Rotate the terminal block into the wiring base until it locks itself
in place.
WARNING:
When you connect or disconnect the Removable Terminal Block (RTB)
with field-side power applied, an electrical arc can occur. This can cause an
explosion in hazardous location installations.
Be sure that power is removed or the area is nonhazardous before proceeding.
24VDC
Source
Output
Module
Status
Network
Status
1734
OB4E
NODE:
0
1
2
3
24V DC
SIO
IO
LINK
Module
Status
Network
Status
1734-4IOL
0
0
1
1
2
2
3
3
NODE:
44013