manualshive.com logo in svg

Allen-Bradley PLC-5 MAP/OSI, User Manual, Page: 95 / 135

Share
Download
Allen-Bradley PLC-5 MAP/OSI User Manual Download Page 95

Appendix

B

B-1

Error Codes

This appendix contains a list of error codes that can be returned to a MSG
instruction given to the OSI interface for execution.

Decimal: Hex:

Description:

257

0101

The requested command is inappropriate for the state of the connection.

259

0103

CLOSE (conclude) not supported by remote device.

260

0104

Invalid or duplicate invoke ID - indicates network performance problem.

263

0107

Service not supported by remote device.

264

0108

Parameter invalid or not supported by remote device, or error in the MMS named variable

specification.

265

0109

The number of service requests outstanding exceeds the negotiated maximum.

266

010a

Outgoing PDU is larger than negotiated maximum.

268

010c

Data value out of range at local node - check validity of data in data table.

269

010d

Insufficient memory resources at local node to complete service.

271

010f

Connection ID already in use.

272

0110

Local service request timeout - connection aborted.

273

0111

Cannot CLOSE this connection - Request(s) outstanding.

274

0112

Connection could not be made.

275

0113

Requested service not available on connection 0 or unable to delete named variable on connection

0.

276

0114

No connection available - all in use.

277

0115

Connection unknown to local node or is lost.

278

0116

Communications temporarily disabled from local node.

280

0118

Parameter support not negotiated - see ISO 9506 Parameter CBB.

295

0127

Access to local node temporarily unavailable.

298

012a

UINFO - named object non-existent on local node.

302

012e

UINFO - Cannot access unnamed variable on local node.

306

0132

Defined variable has an undefined reference attribute. This is a permanent error.

307

0133

An attempt to access the variable on the local node has failed due to a hardware fault.

308

0134

The requested variable is temporarily unavailable on the local node.

309

0135

The local MMS client has insufficient privilege to request this operation.

310

0136

The variable does not exist on the local node.

311

0137

The local unnamed variable is invalid because the format of the address is out of range.

312

0138

An inappropriate or unsupported type is specified for a local variable.

313

0139

The data type of the local variable is inconsistent with the data type of the remote variable or with

the service requested.

Appendix Contents

AB Parts

Summary of Contents for PLC-5 MAP/OSI








































































































































Reviews:

No comments