manualshive.com logo in svg

Allen-Bradley PLC-5 MAP/OSI, User Manual, Page: 5 / 135

Share
Download
Allen-Bradley PLC-5 MAP/OSI User Manual Download Page 5

Preface

Allen-Bradley PLC-5 MAP/OSI Software

(Cat. No. 1785-OSI)

P-1

Preface

This manual provides information on the Allen–Bradley PLC–5

MAP/OSI Software (cat. no. 1785–OSI) and the PLC–5 MAP/OSI
Coprocessor (1785–O5G/B).  It contains information on the following
topics:

For this type of information:

See:

overview of Open System Interconnect (OSI), Manufacturing

Automation Protocol (MAP), and Manufacturing Message

Specification (MMS)

Chapter 1

introduction to the PLC-5 MAP/OSI Coprocessor

Chapter 2

the MMS services supported by your PLC-5 MAP/OSI

Software and Coprocessor, examples of mapping MMS data

types onto PLC-5 controller data files, and how MMS relates to

your OSI coprocessor

Chapter 3

programming your PLC-5 MAP/OSI Coprocessor, including

rules for using MMS named variables and address strings

Chapter 4

advanced programming techniques

Chapter 5

reference information on mapping MMS data types onto

PLC-5 controller data files, including default data types

Appendix A

a list of the PLC-5 MAP/OSI Software's error codes

Appendix B

the PLC-5 MAP/OSI Coprocessor's PICS (Protocol

Implementation Conformance Statement)

Appendix C

a list of the OSI communication layers' parameters, statuses,

counters, and actions related to the PLC-5 MAP/OSI Software

Appendix D

a list of the OSI communications layer management options

Appendix E

Important: This manual does not cover installation procedures for the
PLC–5 MAP/OSI software.  You install the software via the Allen–Bradley
MAP Station Manager, refer to publication 6630–6.5.2 for installation
instructions.

We refer to the PLC–5 MAP/OSI Software as the OSI software, and the
PLC–5 MAP/OSI Coprocessor as the OSI coprocessor throughout this
manual.

You should read this manual before installing and using your
Allen–Bradley PLC–5 MAP/OSI Software.  We assume you have
experience using and programming Allen–Bradley PLC

 Controllers, and

some knowledge of the MAP 3.0 Specification.

Manual Contents

Who Should Read This

Manual

AB Parts

Summary of Contents for PLC-5 MAP/OSI








































































































































Reviews:

No comments