manualshive.com logo in svg

Allen-Bradley PLC-5 MAP/OSI, User Manual, Page: 115 / 135

Share
Download
Allen-Bradley PLC-5 MAP/OSI User Manual Download Page 115

Communication Layers' Attributes

Appendix D

D-9

Transport-Layer Parameters:

Description:

Connect Request Protocol Error Detected

Limit

A threshold level on the Connect Request Protocol Error

counter.

Unsuccessful Connect Request Limit

A threshold level on the Unsuccessful Connect Request

counter.

Detected TPDU Protocol Error Limit

A threshold level on the Detected TPDU Protocol Error counter.

Refused TPDU Protocol Error Limit

A threshold level on the Refused  TPDU Protocol Error counter.

Discard TPDU Checksum Fail Limit

A threshold level on Checksum counter.

Timeout Limit

A threshold level on the Timeout counter.

Window Time

An integer that specifies the maximum time elapsed before this

transport entity will transmit updated window information.

Checksum

An integer that specifies the usage of the optional checksum in

a TPDU header.  A value of 0 is interpreted as Checksum

disabled

.  A value of 1 is interpreted as Checksum 

enabled

.

Local Acknowledge Delay Time

An integer that specifies the maximum time (in milliseconds)

that this transport entity will wait to acknowledge a received

TPDU.

Maximum TPDU Size

This specifies the maximum TPDU size that this transport

entity can support.  This number will be sent out on connect

request TPDU's by this transport entity.

Transport-Layer Counters:

Description:

Connect Request Congestion

The number of times a connection request (CR TPDU) is

refused due to congestion.

Conn. Req. Err. Config. Detected

The number of transport connection rejections sent by this

transport entity due to a configuration error.

Conn. Req. Refused Conf. Err.

The number of transport connection rejections received by this

transport due to a configuration error.

Conn. Req. Prot. Err. Detected

The number of transport connection rejections sent by this

transport entity due to a protocol error.

Unsuccessful Connect Request

The number of transport connection rejections sent by this

transport entity due to an unsuccessful connect request.

Detected TPDU Protocol Error

The number of invalid TPDUs (except for connect request

TPDUs) received by this transport entity.

Refused TPDU Protocol Error

The number of disconnect request and error TPDUs received

by this transport entity in response to any TPDU that is not a

connect request TPDU.

Discarded TPDU Checksum Failure

The number of TPDUs discarded to a checksum error.

Timeout

The number of times the transport layer times out when

attempting to transmit a TPDU.  A timeout error occurs when

the peer transport layer does not acknowledge a previously

transmitted TPDU.

TPDU Sent

The number of times a TPDU is sent.

TPDU Received

The number of times a TPDU is received.

TPDU Retransmission

The number of TPDU retransmissions due to loss or error.

Advertizable Credit Reduced to Zero

The number of times a transport entity sends an AKTPDU

reducing the credit allocation to zero.

AB Parts

Summary of Contents for PLC-5 MAP/OSI








































































































































Reviews:

No comments