Chapter 4
Basic Programming Techniques
4-4
8.
Enter a valid MSG address (for example MG9:30), and press
[ENTER]. The following message appears:
Press a key to change a parameter or <ENTER>
to accept parameters
9.
Press [F1], the Command Type option as many times necessary until
you see a screen like:
MESSAGE INSTRUCTION DATA ENTRY FOR COMMAND BLOCK MG9:30
Communication Command: ASCII
Port Number: 3A
Command Text
BLOCK SIZE = 56 WORDS
Press a key to change a parameter or <ENTER> to accept parameters
>
10.
Press [F2]. The following message appears:
Enter Port Number.
11.
At the
>
prompt, type:
3A [ENTER]
12.
Press [F3] to enter command text. Press [ENTER] three times when
complete.
13.
Press [F10], the accept rung option.
Summary of Contents for PLC-5 MAP/OSI
Page 1: ...PLC 5 MAP OSI Software User Manual Cat No 1785 OSI AB Parts...
Page 4: ...Table of Contents iii OSI Layer Management E 1...
Page 57: ...Chapter 4 Basic Programming Techniques 4 7 For example B7 6 10 AB Parts...
Page 91: ...Mapping MMS Data Types onto PLC 5 40 5 60 File Types Appendix A A 2 T ACC D 16 AB Parts...