Installing Your
Programmable Controller
Chapter 4
4-30
6.
Place the processor on a clean flat surface with the bottom of the
module facing you.
7.
Position the EEPROM memory module in the memory module slot
with its label facing upward. Insert and press firmly for proper
connection (Figure 4.17).
Figure 4.17
Inserting the EEPROM Memory Module into the Processor
10316-I
8.
Slide the processor into the I/O chassis.
9.
Secure the I/O chassis latches.
10.
Connect the power cable.
11.
Apply power to the processor
How to Remove the EEPROM
Repeat steps 1 through 4 from the previous procedure, then insert a coin
into the slot so that it engages the lip on the EEPROM memory module.
Carefully rotate the coin upward to start removing the EEPROM memory
module from its slot. Grasp and remove the EEPROM memory module.
