Timers and Counters
Chapter 11
11-10
Editing in a Completed Rung
You edit an Up Counter, a Down Counter, or a Counter Reset instruction
by performing the following steps.
1.
Position the cursor over the Up Counter, Down Counter or Counter
Reset you want to change.
2.
Press either -(CTU)-, -(CTD)-, -(CTR)-, or any other appropriate
instruction type.
3.
Enter <address>.
Important: Do not perform steps 4 and 5 for a Counter Reset instruction.
4.
Enter <preset value> if appropriate.
5.
Enter <accumulated value>.
