Allen-Bradley InView Marquee 2706-P42, User Manual

Page: 110 / 212

Publication 2706-UM016A-EN-P - June 2002
7-6 DeviceNet Communications with Dual DNI
N7:0 is the message number you wish to trigger in the InView Display.
It gets converted into a String file type ST11:4. Rung 1 then takes
ST11:3 (which is either ^T or ^V) and adds it to ST11:4 and puts it into
ST11:2. ST11:2 is then added to ST11:5 (which is ^M) in rung 2 and
puts it into ST11:0 which will be the string file that is sent out the MSG
function in rung 3. This is shown in the properties of the ST11 data
type below:
The setup for the MSG function is as follows:
0000
AIC
Integer to String
Source
N7:0
0<
Dest
ST11:4
AIC
MSG14
0001
ACN
String Concatenate
Source A
ST11:3
Source B ST11:4
Dest ST11:2
ACN
0002
ACN
String Concatenate
Source A
ST11:2
Source B ST11:5
Dest ST11:0
ACN
0008 END
0003
B3:0
0
EN
DN
ER
MSG
Read/Write Message
Type
Peer-To-Peer
Read/Write Write
Target Device 485CIF
Local/Remote Local
Control Block N9:0
Control Block Length 51
Setup Screen
MSG