Allen-Bradley ControlNet Compact GuardLogix 1769, User Manual, Page: 45 / 100

Configure a ControlNet Module Chapter 3
Schedule the Network Offline
Scheduling a project offline is most useful in the design phase of your project.
Scheduling off line can be used to predict performance and measure bandwidth.
TIP To learn more about using RSLogix 5000 and RSNetWorx software
offline to predict performance, refer to answer ID 54793 on the Rockwell
Automation Knowledgebase at http://www.rockwellautomation.com/
knowledgebase .
Before scheduling a network offline, make sure of the following:
•
Your RSLogix 5000 software project uses one controller and one network.
We recommend that you use only one 1756-CN2, 1756-CNB, or 1768-
CNB module in the local chassis when scheduling the network offline.
•
Your RSLogix 5000 software project is complete but has not been
downloaded to the controller.
If your network has already been scheduled and you made a change to it, you
must reschedule it. For more information, refer to Reschedule a ControlNet
Network that has Previously been Scheduled on page 53 .
To schedule a network offline, perform this procedure.
1. In your RSLogix 5000 software project, right-click your local ControlNet
module and choose Properties.
Rockwell Automation Publication CNET- UM001E-EN-P - June 2016 45