Allen-Bradley ControlNet Compact GuardLogix 1769, User Manual, Page: 32 / 100

Chapter 3 Configure a ControlNet Module
4. On the Module Properties dialog box, configure the connection properties
and then click Apply.
Connection Property Action
Inhibit Module If the module does not need to communicate with the
controller, check the checkbox.
or
If the module needs to communicate with the controller,
leave the checkbox cleared.
IMPORTANT: When you test this portion of the system,
leave the checkbox cleared.
Major Fault On Controller If
Connection Fails While In Run Mode
If you want the controller to produce a major fault if the
connection to the local communication module fails in Run
mode, check the checkbox.
or
If you want the controller to continue operating if the
connection to the local communication module fails in Run
mode, leave the checkbox cleared. Use ladder logic to
monitor the connection.
32 Rockwell Automation Publication CNET- UM001E-EN-P - June 2016