Allen-Bradley ControlNet Compact GuardLogix 1769, User Manual, Page: 33 / 100

Configure a ControlNet Module Chapter 3
Add and Configure a Remote ControlNet Module
After you have added the local ControlNet communication module, you must
add remote ControlNet communication modules. A remote ControlNet module
is a module that resides in a chassis separate from the controller.
To add a remote ControlNet module, perform this procedure.
1. In RSLogix 5000 software, right-click the local ControlNet
communication module and choose New Module.
2. From the Select Module Type dialog box, expand Communications, select
a remote ControlNet communication module, and then click OK.
You can connect any remote ControlNet communication module to a
local ControlNet communication module.
IMPORTANT
This procedure shows the New Module dialog box for a
1756-CN2R/B. However, various dialogs appear during
configuration depending on the ControlNet module you select. For
help configuring a module, refer to the online help in
RSLogix 5000 software.
Rockwell Automation Publication CNET- UM001E-EN-P - June 2016 33