Publication 1756-UM532A-EN-P - May 2006
4-8
Use RSLinx Software to Create a Routing Table
Set the Controller Slot
Setting the controller slot location creates a simple way for the SLC controllers
to exchange data with the ControlLogix controller as long as the SLC
controller is on the same DH-485 network as the module. The SLC controller
can use local messaging to send data to a ControlLogix controller with this
feature. No routing table is required.
The controller slot is the physical location of a ControlLogix controller in a
DH-485 application. The default setting is slot 0. If necessary, use the Channel
Configuration tabs to change the controller slot number.
For more information about using the DH-485 network, refer to Chapter 3,
Use Data Highway 485 Network.
IMPORTANT
This is not the slot location of the 1756-DH485 module, it
is the slot location of the ControlLogix controller where
you want to send the local message.
A.
Change the
controller slot, if
needed.
B.
Click OK.
Summary of Contents for ControlLogix 1756-DH485
