manualshive.com logo in svg

Allen-Bradley ControlLogix 1756-DH485, User Manual, Page: 101 / 110

Share
Download
Allen-Bradley ControlLogix 1756-DH485 User Manual Download Page 101

Publication 1756-UM532A-EN-P - May 2006

Troubleshoot the 1756-DH485 Module        

B-5

Routing Errors in Remote DH-485 Messaging

If the 1756-DH485 module has a problem with routing a Remote DH-485 
Message, it may return a response with an error status of D0 hex. An SLC 
controller displays this error as D000 hex when monitoring the message 
instruction. If you receive this error message, take the following actions:

•

Check your message instruction to make sure a valid local node 
destination, link ID and destination node were entered.

•

Check your routing table in each 1756-DH485 module that the message 
passes through.

•

Connect and apply power to all 1756-DH485 modules.

Interpret the Channel Status Indicators

If the Channel A 
or B Indicator 
is

In This Channel 
Mode

Then the Channel 
Status is

Take This Action

Off

All

Not online.

Place channel online.

DH485

No other node on the 
network.

Check cables.

Green

DH485

Operating.

None, normal 
operation.

Summary of Contents for ControlLogix 1756-DH485















































































































Reviews:

No comments