Publication 1756-UM532A-EN-P - May 2006
Use RSLinx Software to Create a Routing Table
4-3
Create the Routing Table
To create a routing table for your application, follow these steps:
1.
Start RSLinx.
2.
Browse the network.
3.
Right-click on the 1756-DH485 module.
4.
Use the left-side navigation bar to see your DH-485 application, as
shown in the example below.
A.
Expand the configuration
tree until the module
appears.
B.
Right-click on the
1756-DH485 module.
C.
Select Module
Configuration.
Summary of Contents for ControlLogix 1756-DH485
