background image

Visit our website: www.ab.com/catalogs

Bulletin 900

900Builder™ Software

27

Product Overview/Product Selection

Bulletin 900 — 900Builder™ Personal Computer (PC)
Configuration Software for Bulletin 900-TC32 Temperature
Controllers

Table of Contents

Product Selection ...... 27

Product Selection

Computer Hardware Requirements

The software requires a PC with the following minimum hardware:

y

Pentium

®

P90

y

16MB RAM, 32 recommended

y

15MB free disk space

y

CD-ROM Drive (4x speed, with 32 bit device driver) (optional)

y

SVGA resolution monitor (800 x 600)

y

Microsoft

®

Windows

®

-supported mouse

y

Microsoft

®

Windows

®

-supported printer (optional)

y

Available serial 9-pin COM Port for connection to controller RS-232 to RS-485 converter (Bulletin 900-CONV) (required for configuration)

Computer Operating System Requirements

Either of the following operating systems can be used with 900Builder

y

Microsoft

®

Windows

®

95

y

Microsoft

®

Windows

®

98

y

Microsoft

®

Windows NT

®

4.0 (service pack 6)

y

Microsoft

®

Windows

®

2000

y

Provides a Graphic Configuration Option to Using the Bulletin
900-TC32 Controller’s On-Board Keypad and Displays

y

Simplifies Controller Configuration by Use of Fill-in-the-Blank
Menus

y

On-Line Monitoring of Parameters by Controller Simulated
Graphic or Bar Chart Faceplates

y

Provides Data-Logging and Graphic Trending Feature

y

Uses Microsoft

®

Windows

®

Environment to Allow Viewing

Multiple Applications Simultaneously

y

ActiveX Feature Allows Saving Parameters for Use by Other
Windows

®

Applications Such as Excel

y

RS-485 Connection with up to 31 Controllers via Bulletin 900-
CONV RS-232/RS-485 Converter Module

Product Name/Description

Cat. No.

900Builder™ Personal Computer Configuration Software for Bulletin 900-TC32 Temperature Controllers (available in CD format only)

900-BLDSW1

900Builder and 900BuilderLite are trademarks of Rockwell Automation.

Trademarks not belonging to Rockwell Automation are property of their respective companies.

Summary of Contents for Bulletin 900-CONV































Reviews: