Allen-Bradley 6177R-MM, User Manual

Page: 79 / 104

Rockwell Automation Publication 6177R-UM002E-EN-P - March 2017 79
Set Up the UEFI Utility Chapter 5
AMI Restore
Perform the following steps to restore your computer from a system image
backup.
1. Click the AMI Rescue menu to access the AMI Restore screen.
2. Click AMI Restore.
3. Select the appropriate volume from the list.
‘Recovery’ is the volume name where the default backup of factory
images is stored.
4. Click Next.
IMPORTANT When you restore from a back-up image, all data on the target drive is
replaced. Verify that all data is backed up before you proceed with the
following steps.
IMPORTANT Computers with the Windows Embedded 8.1 Industry Pro operating
system do not contain a factory image backup in the Recovery
partition.
IMPORTANT Any USB mass storage drive or eSATA hard disk drive must be
formatted as FAT32, have a drive label other than ‘Recovery,’ and be
non-blank.