Allen-Bradley 1783-WAPAK9, User Manual

Page: 388 / 612

388 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 13 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services
5.
Configure the list of servers to be used for 802.1x authentication for client
devices.
You can specify a separate list for clients by using a certain type of
authentication, such as EAP, LEAP, PEAP, or MAC-based, or specify a list
for client devices by using any type of authentication.
6.
Enter a group name for the server or servers in the Server Group Name
field.
7.
Choose the primary server from the Priority 1 pull-down menu.
If a server that you need to add to the group does not appear in the Priority
pull-down menus, click Define Servers to browse to the Server Manager
page. Configure the server there, and then return to the WDS Server
Groups page.
8.
(Optional) Choose backup servers from the Priority 2 and 3 pull-down
menus.
9.
(Optional) Choose Restrict SSIDs to limit use of the server group to client
devices by using specific SSIDs.
10.
Enter an SSID in the SSID field and click Add.
To remove an SSID, highlight it in the SSID list and click Remove.
11.
Click Apply.
12.
Configure the WDS access point for LEAP authentication.
See Configuring Authentication Types on page 351 for instructions on
configuring LEAP.
TIP
If your WDS access point serves client devices, follow the instructions in the
Configuring Access Points to Use the WDS Device on page 390 to configure the
WDS access point to use the WDS.