Allen-Bradley 1783-WAPAK9, User Manual

Page: 355 / 612

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 355
Configuring Authentication Types Chapter 12
This figure shows the authentication sequence for MAC-based authentication.
Figure 94 - Sequence for MAC-Based Authentication
Combining MAC-Based, EAP, and Open Authentication
You can set up the access point to authenticate client devices by using a
combination of MAC-based and EAP authentication. When you enable this
feature, client devices that associate to the access point by using 802.11 open
authentication first attempt MAC authentication; if MAC authentication
succeeds, the client device joins the network. If MAC authentication fails, EAP
authentication takes place.
See the Assigning Authentication Types to an SSID on page 359 for instructions
on setting up this combination of authentications.
TIP
If MAC-authenticated clients on your wireless LAN roam frequently, you can
enable a MAC authentication cache on your access points. MAC authentication
caching reduces overhead because the access point authenticates devices in its
MAC-address cache without sending the request to your authentication server.
See
Configuring MAC Authentication Caching on page 366 for instructions on
enabling this feature.
Access point
or bridge
Wired LAN
Client
device
Server
1. Authentication request
2. Authentication success
3. Association request
4. Association response
(block traffic from client)
5. Authentication request
6. Success
7. Access point or bridge unblocks
traffic from client
65584