manualshive.com logo in svg

Allen-Bradley 1769-L16ER-BB1B, User Manual

Share
Download
Allen-Bradley 1769-L16ER-BB1B User Manual Download Page 250

Rockwell Automation Publication 1769-UM021G-EN-P - October 2015

255

Use I/O Modules with CompactLogix 5370 L3 Controllers

Chapter 9

Configure Distributed I/O 
Modules on an EtherNet/IP 
Network

Your CompactLogix 5370 L3 control system can use distributed I/O modules on 
an EtherNet/IP network.

Complete these steps to configure distributed I/O modules on an 
EtherNet/IP network.

1.

Right-click Ethernet and choose New Module.

2.

Select the desired Ethernet adapter and click Create.

The New Module dialog box appears.

IMPORTANT

When adding distributed I/O modules, remember to count the remote Ethernet 
adapter to remain within the maximum number of EtherNet/IP network nodes 
limitation for your controller.

The remote I/O modules that are connected to the controller via the Ethernet 
adapter are not counted toward the maximum Ethernet node limit for the 
controller.

For more information on node limitations, see 

Nodes on an EtherNet/IP 

Network on page 125

.

Summary of Contents for 1769-L16ER-BB1B








































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands