Allen-Bradley 1512B, User Manual

Page: 23 / 108

Rockwell Automation Publication 1500-UM055I-EN-P - December 2021 23
Chapter 1 Installation – Standard Enclosure
Figure 15 - Access to Right Side of Power Bus
Front Access – Bottom Exiting Load Cables
If the cables in your cabinet exit from the bottom, the procedure to access the
power bus is almost identical to the one above. Follow the procedure for
Top
Exiting Load Cables on page 25 , but remove the cable duct barrier and cable
duct boot from the top of the lower power cell, rather than those at the bottom
(see
Figure 16 ).
Remove self-tapping screws
ATTENTION: Ensure all barriers are replaced before re-energizing the
equipment. Failure to do so may result in electrical faults and cause
damage to equipment or serious injury to personnel.