The Electronic IF-171 Door Handle
9
2.2 Installation
2.2.1 Assembly Instructions
Mounting screws that are too long can damage the door handle!
The rosette of the electronic door handle can be damaged if the mounting screws are too long!
Please note the following instructions before you start with the assembly:
It is absolutely necessary that you carry out the assembly with the door open.
Ensure that the latches or seals fitted to the door do not obstruct the proper operation of the IF-171
door handle.
Ensure that the door handle does not protrude, thus preventing the door from swinging freely.
Before assembling the door handle, always check the freedom of movement of all components.
After assembly, check the function with the door
open
.
2.2.2 The Drilling Template
The drilling template supplied is used to mark the drilling holes.
There should be a distance of at least 38 mm between the two drilling holes for the handle rosette and for
the key rosette.
2.2.3 Assembly of the Square Pin
1
Electronic door handle
2
Spiral pin
3
Square spindle
4
Adapter sleeve for square pin (only for 7-mm-square pin)
Insert the adapter sleeve into the square pin fixture (if required).
Slide square pin completely on fixing pin and in square pin fixture.
Insert spiral pin into the square pin.
