HERA Series CD/DVD Duplication System / User Manual
20
Duplicator B.30
1. Copy (SM)
Duplicator B.30
8. Master Mode (MM)
OPERATION
This chapter shows each of the menu options and how they are used.
1. Copy
The Copy menu option or the front panel Copy quick key have two different modes of
operation:
Single Master Mode: This mode requires that a single master disc is loaded onto the hard drive
prior to initiating the duplication process. This mode is ideal if your job involves one or very few
master disc(s).
Multi Master Mode (Batch Mode): This mode does not require you to manually load your master.
Simply place the master disc(s) on top of the stack of blank discs needed for that particular job of
the master disc. This mode is ideal if you have numerous master discs and fewer copies for each
master disc.
These modes are described in detail in “Single Master and Multi Master Modes” on page 17. If you are
making copies in Single Master Mode, continue on to the next section. If you are making copies in Multi
Master Mode, jump ahead to “Making Copies in Multi Master Mode” on page 22.
1.1 Making Copies in Single Master Mode
This process will copy your master disc on to several blank discs simultaneously. This mode requires that
your master disc is loaded into a partition on the Hard Drive. See “Load Partition” on page 30 for
instructions on how to do this.
Turn on your autoloader and wait until it has booted up. It should take several minutes for the autoloader
to go through its self adaptive test and auto-calibration procedures. You should see the following signifying
your autoloader is ready:
Make sure the Master Mode is set to Single Master mode (SM). If it is
not, use the
Up or
Down
button to navigate to the
Master Mode
screen. If it is already in Single Master mode (SM), please skip to the
step that starts the copy process.
Press the
Enter
button to enter the
Master Mode
Menu and you
will see a screen similar to one of the following:
Copy
