HERA Series CD/DVD Duplication System / User Manual
15
2. System Info
Use this menu option to see data about the autoloader and its resources (firmware
version, RAM and CPU).
3. Device Info
Use this menu option to see data about the drives that are installed in the autoloader.
4. Load Default
Use this menu option to reset all of the options back to the manufacturer's default
values. You can use this function if your autoloader is acting abnormally.
5. Update Firmware
Use this utility to update the software in your autoloader. To update, insert the
manufacturer’s Certified Update CD into the 1
st
tray and make sure no other discs are in
rest of the trays. Then you can press the
Enter
button to update.
Important:
You should not upgrade your autoloader's firmware unless your system is
becoming unstable or you are advised to do so by Tech Support.
13. Loader Utilities (page 42)
Use the Loader Utilities menu options to access the various utilities built into the autoloader. You
can scroll between the various options using the
Up or
Down
button.
1. Drive Alignment
The Drive Alignment menu is used to check the mechanical alignment between the
drives and the robotic arm. See “Drive Alignment” on page 43 for more information.
2. Alignment Protection
Enabling Alignment Protection makes each drive tray quickly slide in and out after a disc
has been loaded into it. This ensures that the disc sits properly in the disc indentation of
the tray by “shaking” the disc into place. See “Alignment Protection” on page 43.
14. Manage Accounts (page 44)
Use this menu option to:
Create user accounts and passwords to prevent unauthorized use of the autoloader.
Edit existing user account information, including name and password.
Delete existing user account(s).
Enable/Disable this feature.
For additional information, refer to “Introduction to Manage Accounts” on page 16.
15. Shutdown (page 47)
