Compressor w/Nailgun
34
Troubleshooting (cont’d)
Oil discharge in air
z
Improper oil viscosity
-
Replace with SAE30 or SAE20 weight non-detergent oil.
z
Too much oil in crankcase
-
Drain crankcase and fill to proper level.
Compressor overheated
Air pressure regulated too high.
Restricted air filter
Air leak near top of tool or in trigger area
z
Loose screws.
-
Tighten screws.
z
Worn or damaged o-rings or seals.
-
Install Overhaul Kit.
Tool does nothing or operates sluggishly
z
Inadequate air supply.
-
Verify adequate air supply.
z
Inadequate lubrication.
-
Put 5 or 6 drops of oil into air inlet.
z
Worn or damaged o-rings or seal
z
Install Overhaul Kit.
Air leak near bottom of tool
z
Loose screws.
-
Tighten screws.
z
Worn or damaged o-rings or bumper.
-
Install Overhaul Kit.
