31
There are two types of receivers: 3-wire and 4-wire:
3 wire receivers can mount on the radio receiver terminal strip located outside of the control box.
For 4 wire receivers, connect the relay contact wires to terminals 1 (COMMON) and 2 (RELAY/RADIO) on the
receiver terminal strip located outside of the control box (one wire on each terminal). For power connect the
black(negative) wire to terminal 1 (COMMON) and the red (positive) wire to terminal 3 (+12/24VDC) on the
receiver terminal strip as shown below.
RADIO dip switch ON allows the radio receiver to override the automatic close timer. See TIMER adjustment page
for more details.
3
2
1
RECEIVER TERMINAL
STRIP LOCATED
OUTSIDE CONTROL BOX
4 WIRE 12-24VDC
RADIO RECEIVER
BOARD ALSO PROVIDES
12VDC AND 24VDC
ACCESSORY POWER
JUMPER DICTATES
DESIRE VOLTAGE
FOR RADIO RECEIVER
12VDC
24VDC
+ +
12/24VDC
1002
1501
N/O
COMMON
RELA
Y
-1
RADIO RECEIVER CONNECTION
3 +12/24VDC
2 RELAY/RADIO
1 COMMON
