- 4 -
3. Install CoPilot
4. Activate the software
Installation Steps:
(1)
Insert the CoPilot Install Disc
into your CD-ROM drive. After clicking
Yes
to
accept the License Agreement, enter your
Product Key Code
when prompted (you
can find it on the front cover of this
Quick Start
). Click
Next
.
Keep following the instructions in the Installation Wizard, clicking
Next
to go from
one screen to the next.
(2)
Install Data:
You will be given the choice to install map data to your hard drive.
You can install the entire map database, which can require up to
1 GB
of space
depending on which region you’re installing.
This is the recommended option.
If
space is unavailable, you can run the program by inserting the
Data Disc
into your
CD-ROM drive after you open the CoPilot application. NOTE: Once you install a
region it cannot be changed.
(3)
Activate the Software:
See
Activate the Software
below.
(4) When the installation is complete, double-click the
CoPilot Live | Laptop 7
icon
that was placed on your desktop to start CoPilot. If your GPS receiver is attached,
you will be asked to enter a nearby city (see Steps 5 and 6).
At the end of the installation process you will be asked to activate the software. CoPilot
must be activated before you can use it. If you don’t activate during installation, you
will be asked to do this when you open the application. Follow the steps outlined on the
next page to activate.
