- 26 -
Guidance Mode
Passenger vs. Driver Safety Screen
In Guidance Mode, CoPilot provides two different display formats for maps and on-screen
directions that change as you drive. You can switch between the Passenger screen and the
Driver Safety screen by clicking the Driver/Passenger button at the top of the Navigation
Control Panel (see p. 29).
In the
Passenger screen
, your map will always be shown. In the
Driver Safety screen
,
your map will not be shown when you drive at more than 10 m.p.h.; however, you will still
receive verbal instructions as well as simple printed directions on-screen.
NOTE: When
driving in Australia,
all screen buttons are disabled in the Driver Safety screen.
IMPORTANT:
The driver should pull over to the side of the road when looking at the map
and/or the Navigation Control Panel. Even if a passenger operates the computer, for safety
reasons,
the driver should never look at the computer screen while driving.
Passenger Screen
Driver Safety Screen
Click here to
change screens
