Alinx AXU4EV-E, User Manual, Page: 22 / 58

ZYNQ Ultr FPGA Board AXU4EV-E User Manual
22 / 58
Amazon Store: https://www.amazon.com/alinx
related parameters of eMMC FLASH are shown in Table 2-5-1.
Position Model Capacity Factory
U19 MTFC8GAKAJCN-4M 8G Byte Micron
Table 2-5-1: eMMC FLASH Specification
The eMMC FLASH is connected to the GPIO port of the BANK500 of the
PS part of the ZYNQ Ult. In the system design, it is necessary to
configure the GPIO port function of the PS side as an EMMC interface. Figure
2-5-1 shows the part of eMMC Flash in the schematic diagram.
Figure 2-5-1: QSPI Flash in the schematic
Configuration Chip pin assignment:
Signal Name Pin Name Pin Number
MMC_DAT0 PS_MIO13_500 AH18
MMC_DAT1 PS_MIO14_500 AG18
MMC_DAT2 PS_MIO15_500 AE18
MMC_DAT3 PS_MIO16_500 AF18
MMC_DAT4 PS_MIO17_500 AC18
MMC_DAT5 PS_MIO18_500 AC19
MMC_DAT6 PS_MIO19_500 AE19