ZYNQ FPGA Core Board AC7Z100B User Manual
21 / 32
www.alinx.com
D1
(Power Indicator
）
Figure 7-1: AC7Z100B FPGA Core board LED light Hardware Connection
Part 8: Reset circuit
There is a reset circuit on the AC7Z100B core board. The reset input signal
is connected to the reset button on the carrier board. The reset output is
connected to the PS reset pin of the ZYNQ chip. The user can use the buttons
on the carrier board to reset the ZYNQ system. The schematic diagram of the
reset connection is shown in Figure 8-1:
Figure 8-1: Reset circuit connection diagram
ZYNQ
BANK
500
3.3V
U1
Reset Chip
(TCM811)
SYS_RESET
(Connect to carrier board)
PS_POR_B
3.3V
3
.3V
Z
YNQ
D2
(DONE Indicator)
BANK
0
