manualshive.com logo in svg

Alinking ALS-7721, User Manual

Share
Download
Alinking ALS-7721 User Manual Download Page 78

78 

 

 
 
Send HTTP notification: 

The alarm will be sent to the HTTP server you specified. To use this 

function, set the coordinative HTTP server in the Event Server setting page in advance. 

 
Send TCP notification: 

The alarm will be sent to the TCP Server you specified. To use this 

function, set the coordinative TCP server in the Event Server setting page in advance. 
 

Send TCP notification: 

The alarm will be sent to the NAP Server you specified. To use this 

function, set the coordinative NAP server in the Event Server setting page in advance. 
 

Go to preset location: 

Move to the location you specified when a trigger event occurs. To use 

this function, set the present location of the product in the main page in advance. 
 
Click 

Save

 to save and activate your settings when you completed setting. 

Send HTTP/TCP/USP notiflcation

 

Go to preset location

Summary of Contents for ALS-7721


































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands