15
Camera Setting
After the hardware has been installed, insert the attached CD in the computer and execute “IP
Finder.exe” following the steps below to search and change the IP address of the camera.
NOTE
：
If the network environment has the router, please make reference to the chapter of
Appendix D: Set up the Router
Setting with the video server
for different environment description.
1. Start
the
machine.
Execute the IP Finder.exe from the attached CD.
2. Search the camera (Search)
Search the product from your LAN. The factory IP setting 192.168.0.20 appears on the screen.
3. Changing the IP address and related settings for the network environment
When you find the camera, click it and the settings appear on the right side. Change the
settings for the new network environment you need.
NOTE
：
You must enter new settings in the IP, Netmask and Gateway fields and keep the settings in other fields unchanged.
Click Search to find the
Video Server on the LAN.
Enter the settings for the
new network environment
you need.
